Buy Ford 7.3 Powerstroke Oil Cooler Tube in Houston, Texas, US, for US

7 3 Oil Cooler Torque Specs. 7.3 Powerstroke oil cooler reseal/replace YouTube (Note, I have torqued my 7.3 ARP studs down to 150 and 140 ft-lbs, from the advice of R&D IDI Performance On a 7.3L Power Stroke engine, the oil cooler is positioned parallel to and just below the exhaust manifold on the driver side of the engine

Parking brake cable bracket mounting bolt (automatic transmission) 21 ft. Oil pump screen cover and tube retaining nut 38 ft

Torque Specs on Intake, Thermostat, Oil Filter Assembly and Oil Cooler

Torque all oil cooler header bolts to 18 ft-lbs in. Install the oil cooler front header gasket and two retaining bolts 99-03 7.3L Powerstroke Tech Articles - 7.3L Engine Specs / Torque Specs - Bore and Stroke 4.11 in x 4.18 in Firing order 1-2-7-3-4-5-6-8 Oil pressure 40-70 psi Note: Normal operating temperature @ 3,300rpm Engine type and number of cylinders V-8 Compression Ratio 17.5 to 1.

7.3 POWERSTROKE DIESEL TORQUE SPECS YouTube. On a 7.3L Power Stroke engine, the oil cooler is positioned parallel to and just below the exhaust manifold on the driver side of the engine Install the oil cooler front header gasket and two retaining bolts

Oil Cooler 7.3 Power Stroke Diesel. Install two engine mount to bracket bolts, tighten bolts to standard torque specification Oil cooler center bolt: 40.4-44 lb/ft, 55-60 Nm : Oil filter: 10-12.5 lb/ft, 14-17 Nm : Pipe Plugs 1/2 x 14 - Fuel Charging and Controls: